LD-2M 2 Axis Digital Electronic Inclinometer
 |
|
|
This is a high accuracy low cost digital inclinometer which can
be used in a dual or single axis mode measuring over a range of ±30°. The
display shows both x and y axis outputs simultaneously with a resolution of 0.01°
and the graphical display indicates the direction of tilt. The tough Aluminium housing
has ground reference faces to enable precision measurement. An RS-232 cable to enable
connection to a PC via the 9 pin serial port is available separately.
|
Specifications |
Measuring Range
Resolution
Accuracy
Response Time
Operating Temp.
Power
Battery Life
Ouput Format
Weight
Size
LCD |
:
:
:
:
:
:
:
:
:
:
: |
±30°
0.01°
0.05°
<1.0 second
0-45°C
Built in Li-Ion (3.7V)
100 hours
RS232 (9600-N-8-1)
250g
115 x 62 x 29mm
128 x 64 pixels |
|
|
Features
- Dual axis (x-y) or single axis (x) operation
- Digital graphical LCD display with light
- High accuracy, 0.01° resolution, ±30° range
- Supplied in a
protective case
- User recalibration procedure
- RS232 digital interface
- Built in Li-Ion battery (charger supplied)
- 2 Devices can be inter-connected to read relative changes
- External sensor can be connected to give remote reading capability
|
|
PRO360 and PRO3600 Digital Protractor Inclinometers
|
|
|
|
The PRO360 and PRO3600 digital inclinometers give a direct readout of angle
over a full 360° range. The machined aluminium frame gives an excellent
reference surface from which to take readings and has a machined 'V' base
for measuring round objects such as pipes or drive shafts. Please click
here
to download the pdf datasheet, or please
contact us
for more information.
|
|
PRO360 |
PRO3600 |
| Range |
360° |
360° |
| Resolution |
0.1° |
0.01° (0-10°)
0.1° (10-90°) |
| Accuracy |
0.1° ±10° from level
0.1° ±10°
from plumb
0.2° rest of range |
0.05° ±10° from level
0.1° ±10°
from plumb
0.2° rest of range |
| Repeatability |
±0.1° |
±0.05° |
| Serial Port |
N.A. |
10 pin rect. |
| Supply |
9v (PP3 battery) |
9v (Battery or ext.) |
| Battery Life |
500 hours typical |
500 hours typical |
Temperature
Operating
Storage
|
-5° to 50°C
-20° to 65°C
|
-5° to 50°C
-20° to 65°C
|
|
|
Features
- Standard reference = 0.00°
- 'ALT ZERO' button for differential readings
- 'HOLD' button to freeze reading
- User recalibration procedure
- Automatic shutdown for powersave (can be disabled on PRO3600)
Applications
- Drive shaft alignment
- Setting control surfaces on aircraft
- Drainage angles and run off slopes
- Grader and tractor work alignment
- Platform monitoring
|
|
SmartTool Digital Level And Inclinometer
|
|
|
Features
- 360° measurement range, displays to 0.1°
- Switchable reading between degrees, % slope and pitch (rise over run)
- Available as a module or mounted in 60 or 120cm box section levels (part no's STM, ST-60 and ST-120)
- Switchable beeper sounds when SmartTool is level.
- Tough durable construction suitable for use on site
- Please click here for more information.
Applications
- Fitting roof beams at the desired angle
- Measuring or setting the pitch of drainage pipes
- Setting or checking the angle of disabled access ramps
- Setting or checking the grading of ground or roads for drainage
|
| |
|
APS Digital Electronic Inclinometer With Remote Sensor
|
|
|
These inclinometers combine a capacitive tilt sensor
with a digital display unit to give a direct readout of angle.
They are completely self contained and powered from a battery
contained within the display unit. Several types are available for
different measuring ranges and full technical details are available on
request. Please click
here
to download the pdf datasheet, or please
contact us
for more information.
|
Specifications |
Supply Voltage
Battery Life
Time Constant
Settling Time
Linearity
Null to 10°
10 to 45°
Temperature Range
Operating
Storage |
:
:
:
:
:
:
:
: |
9V battery (PP3)
1000 hours
0.3 sec
500 mSec
±0.1°
1% of reading
-18° to 55°C
-40° to 65°C |
|
|
|
LD-2M (154Kb)