|
No. 83 High Precision 360° Inclinometer (Clinometer) |
Supplied as standard with a hardened combined flat and 'V' base and a
wooden box
for protection. In use, the worm is disengaged
by depressing the micrometer drum, and the vial assembly is
rotated manually until the vial is approximately level.
Fine adjustment is then made by rotating the micrometer drum
until the vial is perfectly level. The angle is then read
off the scale in degrees and minutes.
|
|
|
|
Specifications |
Glass aperture :
Micrometer drum :
Vial
sensitivity :
Range :
Max. error between
two readings :
Dimensions :
Weight : |
1 division = 1 degree
1 division = 1 minute
1 division = 1 minute
±180 degrees
1.5 minutes
150 x 124 x 30mm (h x w x d)
1.6Kg |
|
Part Numbers |
83 :
83M :
83-S120 :
83-SM :
83-CM :
83-SA : |
With Standard Flat and 'V' base
With Magnetic Flat and 'V' base
Prismatic base, length 120mm
Magnetic flat base, length 120mm
Morse taper base
American standard taper base |
|
|
No. 81 High Precision 360° Pendulum Inclinometer (Clinometer) |
Supplied as standard with a hardened combined flat and 'V' base and a
wooden box
for protection. In use, the drum pendulum moves under the
effect of gravity, and the angle can be read from the drum and
vernier scale in degrees and minutes. There is an optional
magnifier to enable the vernier to be read more accurately.
There is a locking knob to fix the drum after settling, and the
entire unit is sealed to stop the ingress of dirt or dust.
|
|
|
|
Specifications |
Main Scale :
Vernier Scale :
Range :
Error between
two readings :
Dimensions :
Weight : |
1 division = 1 degree
1 division = 1 minute
±180 degrees
2 minutes max.
156 x 150 x 30mm (h x w x d)
1.6Kg |
|
Part Numbers |
81 :
81-MAG :
81-M :
81-CM :
81-SA : |
With Standard Flat and 'V' base
Vernier Magnifier for 81
Magnetic base, length 120mm
Morse taper base
American standard taper base |
|
|
No. 86 General Purpose 360° Inclinometer (Clinometer) |
|
A general purpose 360° inclinometer which can be fixed to an instrument
or used free standing. The main body is rotated by hand
until the vial reads level, and the angle can be read from the
scale to approximately 0.5° accuracy. It is supplied in a protective
plastic case. |
|
|
|
Specifications |
Dial markings :
Vial
sensitivity :
Range :
Accuracy :
Dimensions :
Weight : |
1 division = 1 degree
30 minutes per 2mm
±180 degrees
0.5°
100 x 100 x 15mm (h x w x d)
0.3Kg |
|
Part Numbers |
86 :
86M :
86/200 :
86/300 :
86/500 :
86/1000 : |
Standard type
86 with magnetic base
200mm removable base
300mm removable base
500mm removable base
1000mm removable base |
|
|
No. 90 High Precision 90° Inclinometer (Clinometer) |
|
A 90° inclinometer with horizontal and vertical flat and 'V'
surfaces which can be used to measure and set angle. The
vial assembly is rotated by hand
until the vial reads level, and the angle is read from the
degree and vernier scale to within 10 minutes (0.1°) accuracy. It is supplied in a protective
wooden box. |
|
|
|
Specifications |
Scale markings :
Vernier Scale; :
Vial sensitivity :
Range :
Accuracy :
Dimensions :
Weight : |
1 division = 1 degree
1 division = 10 minutes
1 minute per 2mm
90 degrees
0.1°
150 x 150 x 39mm (h x w x d)
1.5Kg |
|
Part Numbers |
90 :
90-M :
|
Standard type
With magnetic base and side
|
|
|
Micrometer Adjustable Precision Inclinometers |
|
|
These precision micrometer block levels can be used for levelling
as well as for measuring and setting small angles very precisely.
Please click the image for more information. |
|
• Block and frame types available
• Micrometer adjustment down to 0.01mm/m per division
• Flat and 'V' bearing surfaces
• Magnetic version available on request
• Repair and recalibration service available |
