Plastic spirit levels and spirit level vials.

We offer many standard types of plastic levels from stock to suit most applications. We can supply high volume low cost vials for OEM customers, or small quantities of standard products for more specialist companies with smaller requirements. Shown below are the different ranges we offer, please contact us with your requirements or questions.

Spencer Place
97-99 Gloucester Rd
Croydon, Surrey
CR0 2DN, England
t. +44 (0)20 8684 1400
f. +44 (0)20 8684 1422

Plastic Cylindrical and Tubular Vials

plastic tubular spirit level bubble vial (phial)

Part No.	L (mm)	D (mm)	LS (mm)	Colour
CY12	12	5	4.5	Green
CY14	14	6	5	Green
CY16	16	7	6	Green, Red Blue, Clear
CY25/7	25	7	9.5	Green
CY25/9.4	25.2	9.5	12	Green
CY25	25	10	9.5	Green
CY30/9.8	30	9.8	12	Green
CY30	30	10	9.5	Green
CY32	32	9.4	13.5	Green
CY35/15	35	15	13	Green
CY38	38	9.4	13.5	Green
CY40	39.6	9.5	13	Green
CY42	42	12	12.7	Green

Plastic Square Section Vials

plastic square section spirit level bubble vial (phial)

Part No.	L (mm)	W (mm)	H (mm)	LS (mm)
SC29	29	10	10
SC32	32	12	12	9.8
SC36	36	15	15	12
S29	29	10	10	11.5
S36	36	15	15	13
S40	40	15	15	13

These vials have a standard sensitivity of 35 arc minutes for 2mm of bubble movement.
The 'S' range are extremely high quality vials with a machined barrel form bore so they can be mounted or referenced against any of the four sides. They have circlip type inserts for line markings for optimum clarity and zero parallax error.
The 'SC' range have a moulded radius on one face only and have internally printed lines on the same face.

Plastic Round Section Vials

plastic round section spirit level bubble vial (phial)

Part No.	D (mm)	H (mm)	LS (mm)	Other Info
C32	32	12	13	-
C32X15	32	15	13	-
C34	34	18	12.5	Hollow block
C35	35	15	13	-
C36	36	15	13	Tapered edge
B2	34x22	15	13	Flat sides

These vials have a standard sensitivity of 35 arc minutes for 2mm of bubble movement.
They are suited for easy mounting into a bore hole. There are different types for different applications, the C34 type is a hollow moulding with a tubular vial moulded block with a machined bore. There are several mounting accessories not shown here, so please contact us with the details of your enquiry and we can advise on the most suitable type for your application

Plastic Screw-on Levels

Part No.	L (mm)	W (mm)	H (mm)	H/C (mm)	D (mm)
Screw on levels with fixed end caps.
SF55	55	15	15	41	4.2
SF56	56	15	15	42.5	4.2
SF35	66	15	17.5	51	4.2
SF40	70	15	17.5	55	4.2
SF70	70	17	17	53	4.2
SF88	88	16	16	49.7	4.2
SF98	98	16	16	75.7	4.2
Screw on levels with separate end caps.
SE35	56	15	17.5	43	4.2
SE40	60	15	17.5	46.7	4.2
Screw on levels for flush or underside mounting.
S60	60	15	15	45.8	4.2
HFU35	66	15	18.7	51	3
HFU40	70	15	17.7	55	3