High precision closed loop inertial grade inclinometersThese are extremely sensitive inertial sensors that measure horizontal angle or vertical deviation with virtually infinite resolution. These inclinometer units are fully self-contained (closed loop system). The high-level DC output signal is proportional to the sine of the angle of tilt from a ±1° to ±90° full range. They respond to changes of slope as small as 0.1 second of arc. Fluid filled units have hystersis less that 0.0005% of full range output, and vibration rectification is less than 10 arc seconds/g2. Please click the images or links below for more information. If you need any assistance with product selection then please contact us with your requirements. |
| LSO Series - High Precision Electronic Inclinometers | |
| The LSO Series are high performance, closed loop, fluid damped precision single axis inclinometer sensors. In short, they are one of the highest precision inclinometer sensors currently available. The closed loop design means that they can measure with extreme precision even in the prescence of shock or vibration. These inertial sensors meet the needs of a variety of commercial, industrial and militay applications. Each housing is machined from solid aluminium making the LSO extremely sturdy, and ideal for all weather use. It is available as standard with analogue voltage output, but can also be supplied with 4-20mA ouput. Please click on the links below for the datasheet, or contact us for further information and pricing. | |
|
Part Number Range (°) Input (Vdc) Output Non Linearity % FRO Repeat- ability % FRO Resolution (arc seconds) Thermal Zero Shift (%FRO/°C) Scale Fact Temp Shift (% / °C) |
|
| LCF-196 - High Precision Biaxial Electronic Inclinometer | |
|
The LCF employs a fluid damped torsion flexure suspension that attenuates
input energy to provide repeatability and precision at low frequencies.
It is a high precision two-axis unit housed in a 22mm diameter package ideally suited for
geophyical monitoring. Applications include:
• Geophysical movement monitoring |
|
|
Part Number Range (°) Number of axes Input (Vdc) Output Non Linearity % FRO Resolution (arc seconds) Thermal Zero Shift (%FRO/°C) Scale Fact Temp Shift (% / °C) |
|
| LCF-2000/3000 - 2/3 axis High Precision Electronic Inclinometer | |
|
The LCF 2000 / 3000 Series Inclinometer is a two or three axis version of the rugged,
high accuracy LCF Series. It is available with a wide range of options including single ended
input power, internal temperature sensor and 4-20mA output. Applications include:
• Antenna and radar levelling |
|
|
Part Number Range (°) Number of axes Input (Vdc) Output Non Linearity % FRO Resolution (arc seconds) Thermal Zero Shift (%FRO/°C) Scale Fact Temp Shift (% / °C) |
|
| LSR Series - High Precision Electronic Inclinometer | |
|
The LSR Series Inclinometer is suitable for applications with
limited space. The compact, cylindrical shape and the "stacking" feature of
the LSR facilitate the use of several inclinometers when multi-axis measurement is
required. The LSR inclinometer offers the same precise readings with high outputs
at lower range frequencies as the LSO Series. The applications include:
• Heavy construction and grading projects |
|
|
Part Number Range (°) Number of axes Input (Vdc) Output Non Linearity % FRO Resolution (arc seconds) Thermal Zero Shift (%FRO/°C) Scale Fact Temp Shift (% / °C) |
|
| CDU-224 - Inclinometer Display Unit | |
|
The CDU-224 Series is a microprocessor based panel meter designed to take the
output from any of the above gravity referenced inclinometers and display it as
an angle. The compact unit provides the +/-15VDC sensor excitation, conditions
the inclinometer output and displays the angle down to 0.001 degrees. When supplied
with an inclinometer it is factory calibrated to that device at several points in the
inclinometer's range, and then linearises the input to the closest calibration points.
An RS485 output is provided for interfacing to a computer, PLC or printer. Bezel and
scratch resistant lenses are sealed to meet requirements of NEMA 4 and a gasket is
supplied to seal the unit to a panel.
Please click here
to download the datasheet or
contact us for more information. |
|




