Product Datasheet (pdf 643 kB) Neigungsmesser-Auswahltool DCL-20-RS485 - Einachsiger Closed Loop-Servo-Neigungsmesser, ±20°, mit RS485-ModBus-Schnittstelle
The DCL inclinometer utilises a precision closed loop inertial inclinometer sensor to give extremely accurate and high resolution angle measurement. It has fully isolated power supplies, with a ModBus over RS485 interface.
Funktionen
- Closed loop inertial sensor with optical position feedback and fluid damping
- Single axis measurement range ±20°
- High resolution measurement <0.0005°
- High accuracy over full measurement range (<0.005°)
- Low temperature drift (<0.01° over 0-40°C)
- ModBus over RS485 Interface
- Rigid machined Anodised Aluminium housing (IP67)
- Highly stable over time, and ideal for use in high vibration environments
Produktdaten
Parameter | Wert | Einheit |
---|---|---|
Anzahl der Achsen: | 1 | - |
Bereich | ±20 | ° |
Auflösung | 0.0005 | ° |
Genauigkeit bei 20 °C | 0.005 | ° |
Art des Ausgangs | RS485 (ModBus) | - |
Ausgabeformat | ModBus | - |
Technologie | Closed Loop Servo | - |
Maximaler Null-Bias-Fehler | 0.0025 | ° |
Langzeit-Drift | <0.01 | ° |
Accuracy at 0 - 50°C | 0.01 | ° |
Frequenzgang | 0.125 to 7 | Hz |
Maximale Anzahl Geräte im Netzwerk | No Limit | - |
Parameter | Wert | Einheit |
---|---|---|
Speisespannung (min.) | 19 | V |
Speisespannung (max.) | 30 | V |
Speisestrom | 70 | mA |
Abmessungen | Wert | Einheit |
---|---|---|
Sensorgehäusematerial | Anodised Aluminium | - |
Anschlussstil | M8 Panel Plug | - |
Länge | 135 | mm |
Breite | 61.5 | mm |
Höhe | 74.5 | mm |
Gewicht | 850 | Grams |
Parameter | Wert | Einheit |
---|---|---|
Funktioneller Temperaturbereich | -10 to 60 | °C |
Lagertemperaturbereich | -20 to 70 | °C |
Sensor-Schutzart | IP67 | - |