Inclinometers » Inclinometer Sensors » Closed Loop » DCL Series » DCL2-05-TCP - Dual axis closed loop servo inclinometer, ±5°, with TCP/IP ethernet interface

Product Datasheet (pdf 505 kB) Inclinometer Selection Tool DCL2-05-TCP – Dual axis closed loop servo inclinometer, ±5°, with TCP/IP ethernet interface

The DCL2 series inclinometer utilises two precision closed loop inertial inclinometer sensors to give an extremely accurate and high resolution angle measurement in both pitch and roll axes. It has fully isolated power supplies, with a ModBus over TCP/IP Ethernet interface.

Features

  • Closed loop inertial sensor with optical position feedback and fluid damping
  • Dual axis measurement range ±5°
  • High resolution measurement <0.0002°
  • High accuracy over full measurement range (<0.0025°)
  • Low temperature drift (<0.006° over 0-40°C)
  • ModBus TCP/IP ethernet interface.
  • Rigid machined Anodised Aluminium housing (IP67)
  • Highly stable over time, and ideal for use in high vibration environments

Product Specification

Parameter Value Unit
Number of Axis: 2 -
Range ±5 °
Resolution 0.0002 °
Accuracy at 20°C 0.0025 °
Output Type Ethernet (ModBus) -
Output Format ModBus -
Technology Closed Loop Servo -
Maximum Zero Bias Error 0.0025 °
Long Term Drift <0.01 °
Accuracy 0 - 50°C 0.006 °
Frequency Response 0.125 to 7 Hz
Maximum Devices On Network No Limit -
Parameter Value Unit
Supply Voltage (min) 19 V
Supply Voltage (max) 30 V
Supply Current 70 mA
Dimension Value Unit
Sensor Case Material Anodised Aluminium -
Connection Style M8 Panel Plug -
Length 135 mm
Width 61.5 mm
Height 74.5 mm
Weight 850 Grams
Parameter Value Unit
Operational Temperature Range -20 to 70 °C
Storage Temperature Range -40 to 80 °C
Sensor Seal Rating IP67 -