Inclinometers » Inclinometer Sensors » Single Axis » MAS-360 Series » MAS-360-1-CANJ - Single axis inclinometer sensor, ±180°, CAN J1939 interface

Product Datasheet (pdf 420 KB) Inclinometer Selection Tool MAS-360-1-CANJ – Single axis inclinometer sensor, ±180°, CAN J1939 interface

The MAS-360 is a low cost single axis inclinometer sensor supplied in a sealed anodised Aluminium housing. It has a CAN digital interface with J1939 protocol. The devices are individually calibrated to minimise non-linearity errors, cross axis and zero bias errors.


  • CAN Bus interface with SAE J1939 protocol
  • Single axis measurement range ±180°
  • Anodised Aluminium housing, IP67 / IP69K rated
  • Dual redundant sensors with accuracy to ±0.1°


  • Mobile crane boom angle measurement
  • Excavator boom, dipper and bucket monitoring
  • Telescopic and scissor lift boom monitoring
  • Cradle monitoring and feedback control

Product Specification

Parameter Value Unit
Number of Axis: 1 -
Range ±180 °
Resolution 0.01 °
Accuracy at 20°C 0.1 °
Output Type CAN J1939 -
Output Format SAE J1939 -
Technology MEMS -
Maximum Zero Bias Error 0.1 °
Uncompensated Temp Error 0.02 ° / °C
Frequency Response 1 Hz
Parameter Value Unit
Supply Voltage (min) 6.5 V
Supply Voltage (max) 36 V
Supply Current 20mA mA
Dimension Value Unit
Sensor Case Material Anodised Aluminium -
Connection Style Deutsch DT04-4P -
Cable Length 0.3 m
Length 44 mm
Width 41 mm
Height 12.5 mm
Weight 60 Grams
Parameter Value Unit
Operational Temperature Range -40 to 85 °C
Storage Temperature Range -40 to 85 °C
Sensor Seal Rating IP67 & IP69K -