LD-2M 2 Axis Digital Electronic Inclinometer
 |
|
|
|
This is a high accuracy low cost digital inclinometer which can
be used in a dual or single axis mode measuring over a range of ±30°. The
display shows both x and y axis outputs simultaneously with a resolution of 0.01°
and the graphical display indicates the direction of tilt. The tough Aluminium housing
has ground reference faces to enable precision measurement. A
3m RS-232 cable to enable
connection to a PC via the 9 pin serial port is available separately.
|
| Specifications |
Measuring Range
Resolution
Accuracy
Response Time
Operating Temp.
Power
Battery Life
Ouput Format
Weight
Size
LCD |
:
:
:
:
:
:
:
:
:
:
: |
±30°
0.01°
0.05°
<1.0 second
0-45°C
Built in Li-Ion (3.7V)
100 hours
RS232 (9600-N-8-1)
250g
115 x 62 x 29mm
128 x 64 pixels |
|
|
Features
- Dual axis (x-y) or single axis (x) operation
- Digital graphical LCD display with light
- High accuracy, 0.01° resolution, ±30° range
- Supplied in a
protective case
- Switchable scale - Degress or mm/m
- User recalibration procedure
- RS232 digital interface
- Built in Li-Ion battery (charger supplied)
- Display changes automatically from X-Y dual axis to X axis to Y axis as it it used in the different modes
|
|
PRO360 and PRO3600 Digital Protractor Inclinometers
|
|
|
|
The PRO360 and PRO3600 digital inclinometers give a direct readout of angle
over a full 360° range. The machined aluminium frame gives an excellent
reference surface from which to take readings and has a machined 'V' base
for measuring round objects such as pipes or drive shafts. Please click
on the links below to download the pdf datasheet, or please
contact us
for more information.
|
|
PRO360 |
PRO3600 |
| Range |
360° |
360° |
| Resolution |
0.1° |
0.01° (0-10°)
0.1° (10-90°) |
| Accuracy |
0.1° ±10° from level
0.1° ±10°
from plumb
0.2° rest of range |
0.05° ±10° from level
0.1° ±10°
from plumb
0.2° rest of range |
| Repeatability |
±0.1° |
±0.05° |
| Serial Port |
N.A. |
10 pin rect. |
| Supply |
9v (PP3 battery) |
9v (Battery or ext.) |
| Battery Life |
500 hours typical |
500 hours typical |
Temperature
Operating
Storage
|
-5° to 50°C
-20° to 65°C
|
-5° to 50°C
-20° to 65°C
|
|
|
Features
- Standard reference = 0.00°
- 'ALT ZERO' button for differential readings
- 'HOLD' button to freeze reading
- User recalibration procedure
- Automatic shutdown for powersave (can be disabled on PRO3600)
Applications
- Drive shaft alignment
- Setting control surfaces on aircraft
- Drainage angles and run off slopes
- Grader and tractor work alignment
- Platform monitoring
- Machine tool setting
|
|
PRO360L Digital Protractor
|
|
|
|
The PRO360L Digital Protractor can be used in a wide variety of applications for measuring or setting angle over
the full 360° range. Simply place it on the surface to be measured and it gives a digital readout of angle with a
0.1° resolution. A version with a magnetic
base is also available. Please click on the links above to download the pdf datasheets, or please
contact us
for more information.
|
| Specifications |
Measuring Range
Resolution
Accuracy
Response Time
Operating Temperature
Battery
Battery Life
Size and Weight
Auto Shut Off
Sealing |
:
:
:
:
:
:
:
:
:
: |
360° (4 x 90°)
0.1°
±0.2°
1.0 second
0-50°C
Lithium 3V (CR2032)
2000 hours typical
150x60x32mm - 350g
5 minutes
IP54 |
|
|
Features
- Low cost alternative to the PRO360
- Measures over full 360° range
- Standard reference = 0.0°
- ZERO button for differential readings
- HOLD button to freeze reading
- Simple user re-calibration procedure to restore factory accuracy
- Precision machined aluminium frame
- Automatic shutdown for power save
- Magnetic base version, available, part reference PRO360LM.
|
|
MiniPro Digital Protractor
|
|
|
|
This digital angle measuring tool can be used in a wide variety of applications
for setting angle over the full 360° range. Simply place it on a reference surface to zero,
and then on to the surface to be measured and it gives a digital readout of angle with a 0.1°
accuracy. Please click on the links above to download the pdf datasheets, or please
contact us
for more information.
|
| Specifications |
Measuring Range
Resolution
Accuracy
Response Time
Operating Temperature
Battery
Battery Life
Size and Weight
Auto Shut Off
Sealing |
:
:
:
:
:
:
:
:
:
: |
360°
0.1°
±0.2°
1.0 second
0-45°C
Lithium 3V (CR2032)
2000 hours typical
51 x 51 x 33mm - 120g
5 minutes
IP54 |
|
|
Features
- Magnetic base
- Relative measurement of angle to 0.1°
- 'ZERO' button to set zero at any point
- 3V Lithium battery type CR2032 supplied
- Long battery life (>2000 hours)
- Automatic shutdown for power-save
Applications
- Setting blade angle of mitre Saws
- Setting blade angle of circular Saws
- Setting blade angle of band saws
- Setting workpiece angle for milling
|
|
Dual Axis Inclinometer With Remote Display
|
|
|
|
The RAS-2-10 combines a dual axis (pitch and roll) inclinometer sensor with a remote readout unit that can
simultaneously indicate both angles up to a maximum of ±10° with a resolution of 0.01°.
The sensor and display housing are both machined from sold aluminium and are extremely sturdy.
This is a rugged system which can be used in harsh environments.
Please click on the links above to download further information, or please
contact us.
|
| Specifications |
Measuring Range
Resolution
Accuracy
Display Refresh
Operating Temperature
Power
Size - Sensor
Size - Display
Sealing - Sensor
Sealing - Display |
:
:
:
:
:
:
:
:
:
: |
±10°
0.01°
±0.05°
0.5 seconds
-40 to 85°C
8-36V DC (<120mA)
88x88x45mm - 330g
150x126x34mm - 1Kg
IP67
IP65 |
|
|
Features
- Dual axis measurement
- Simultaneous readout of both X and Y (pitch and roll) axes
- ±10° measurement range
- 0.01° display resolution
- ±0.05° accuracy
- Cable lengths up to 100m
- Sensor sealed to IP67, display IP65
|
|
Dual Axis Inclinometer With Remote Display and Programmable Tilt Switch
|
|
|
The ITS-2-45 combines a dual axis (pitch and roll) inclinometer sensor with a remote readout unit that can
simultaneously indicate both angles up to a maximum of ±45° with a resolution of 0.1°. The display unit also
contains two relays which can be operated at a pre-programmed angle in the X and Y axis.
The sensor is small, rugged, sealed to IP67, and can
be mounted in harsh environments.
This is a relatively low cost system and is typically
used in vehicles where the display unit is mounted inside the cab. Please click the
links above to download further information, or please
contact us to discuss your application
|
| Specifications |
Measuring Range
Resolution
Accuracy
Display Refresh
Operating Temperature
Power
Size - Sensor
Size - Display
Sealing - Sensor |
:
:
:
:
:
:
:
:
: |
±45°
0.1°
±0.5° (at 20°C)
5 Hz
-40 to 85°C
9-36V DC (<80mA)
46x41x13mm - 60g
72x72x120mm - 400g
IP67 |
|
|
Features
- Dual axis measurement
- Simultaneous readout of both X and Y (pitch and roll) axes
- Two independently programmable tilt switches for X and Y axis
- ±45° measurement range
- 0.1° display resolution
- ±0.5° accuracy (at 20°C)
- Cable lengths up to 100m
- Sensor sealed to IP67
|
|
Digital Laser Level
|
|
|
Features
- 360° measurement range, displays to 0.1°
- Switchable display between degrees and % slope
- Length 60cm - supplied in a protective case
- Switchable sounder at level and plumb for hands free operation.
- Independantly switchable spot type laser
- Please click here for more information.
Applications
- Fitting roof beams at the desired angle
- Measuring or setting the pitch of drainage pipes
- Setting or checking the angle of disabled access ramps
- Setting or checking the grading of ground or roads for drainage
|
| |
|
Smart Tool Digital Level
|
|
|
Features
- 360° measurement range, displays to 0.1°
- Switchable reading between degrees, % slope and pitch (rise over run)
- Available as a module or mounted in 60 or 120cm box section levels (part no's STM, ST-60 and ST-120)
- Switchable beeper sounds when SmartTool is level.
- Tough durable construction suitable for use on site
- Please click here for more information.
Applications
- Fitting roof beams at the desired angle
- Measuring or setting the pitch of drainage pipes
- Setting or checking the angle of disabled access ramps
- Setting or checking the grading of ground or roads for drainage
|
| |
|
APS Digital Electronic Inclinometer With Remote Sensor
|
|
|
These inclinometers combine a capacitive tilt sensor
with a digital display unit to give a direct readout of angle.
They are completely self contained and powered from a battery
contained within the display unit. Several types are available for
different measuring ranges and full technical details are available on
request. Please click
here
to download the pdf datasheet, or please
contact us
for more information.
| Specifications |
Supply Voltage
Battery Life
Time Constant
Settling Time
Linearity
Null to 10°
10 to 45°
Temperature Range
Operating
Storage |
:
:
:
:
:
:
:
: |
9V battery (PP3)
1000 hours
0.3 sec
500 mSec
±0.1°
1% of reading
-18° to 55°C
-40° to 65°C |
|
| Part No. |
Range |
Resolution |
| APS-20 |
±20° |
0.01° |
| APS-45 |
±45° |
0.1° |
| APS-90 |
0-90° |
0.1° |
|
LD-2M Technical Datasheet (235Kb)
Remote Angle Sensor - 2D and 3D CAD Drawings (348Kb)